SKF 6316 /C4 Deep Groove Ball Bearing - 80 mm ID, 170 mm OD, 39 mm Width, Cylindrical Bore, C4 MISUMI The 12-piece sliding hammer set

The 12-piece sliding hammer set in the case K-22-01-UNC is used for pulling parts with threaded holes (dowel pins

The separating and pulling process is capable of initially separating these parts gently before they can be pulled off from the outside

the BEARHUG installs faster than a traditional locknut-and-lockwasher pair and eliminates any need to cut or repair a shaft keyway

The clamping locking pliers of series 697 are used for clamping

The 2-jaw and steering arm puller with hydraulic lift cylinder from series 129 is used for the hydraulic extraction of ball pins when removing ball joints on steering and tie rods specifically for trucks and low-floor buses

SKF 6316 /C4 Deep Groove Ball Bearing - 80 mm ID, 170 mm OD, 39 mm Width, Cylindrical Bore, C4 MISUMI The 12-piece sliding hammer setDeep Groove Ball Bearing with increased clearance Deep Groove Ball Bearings are versatile and widely used bearings. They can accommodate radial loads and, to a lesser extent, axial loads in both directions. Known for their low friction and quiet operation. Manufactured to precision tolerance class for demanding applications. Robust steel cage construction ensures durability. Suitable for use in a wide range of industrial applications where reliability